HP Manager Software manual Set port, Following command removes Distributed MAP

80CHAPTER 4: PORT COMMANDS

specify the external antenna fitted, use the set {ap dap} radio antennatype command.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Examples — The following command configures Distributed MAP 1 for

MAP model AP3750 with serial-ID M9DE48B012F00:

WX4400# set dap 1 serial-id M9DE48B012F00 model ap3750 success: change accepted.

The following command removes Distributed MAP 1:

WX4400# clear dap 1

This will clear specified DAP devices.

Would you like to continue? (y/n) [n]y

See Also

„clear dap on page 62

„clear port type on page 65

„set port type ap on page 87

„set radio-profile11g-onlyon page 329

„set system countrycode on page 54

set port Administratively disables or reenables a port.

Syntax — set port {enable disable} port-list

„enable — Enables the specified ports.

„disable — Disables the specified ports.

„port-list— List of physical ports. MSS disables or reenables all the specified ports.

Defaults — All ports are enabled.

Access — Enabled.

History — Introduced in MSS Version 3.0.