HP Manager Software manual See Also „ display igmp querier on

set igmp querier 419

set igmp querier Enables or disables the IGMP pseudo-querier on a WX, on one VLAN or all VLANs.

Syntax — set igmp querier {enable disable} [vlan vlan-id]

„enable — Enables the pseudo-querier.

„disable — Disables the pseudo-querier.

„vlan vlan-id— VLAN name or number. If you do not specify a VLAN, the pseudo-querier is enabled or disabled on all VLANs.

Defaults — The pseudo-querier is disabled on all VLANs by default.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — 3Com recommends that you use the pseudo-querier only when the VLAN contains local multicast traffic sources and no multicast router is servicing the subnet.

Examples — The following example enables the pseudo-querier on the orange VLAN:

WX1200# set igmp querier enable vlan orange success: change accepted.

See Also

„display igmp querier on page 405

set igmp receiver Adds or removes a network port in the list of ports on which a WX forwards traffic to multicast receivers. Static multicast receiver ports are immediately added to or removed from the list of receiver ports and do not age out.

Syntax — set igmp receiver port port-list{enable disable}

„port port-list— Network port list. MSS adds the specified ports to the list of static multicast receiver ports.

„enable — Adds the port to the list of static multicast receiver ports.

„disable — Removes the port from the list of static multicast receiver ports.