HP Manager Software manual Set length, Examples To turn off these confirmation messages, type

set length 51

	MSS displays a message requiring confirmation when you enter certain
	commands that can have a potentially large impact on the network. For
	example:
	WX4400# clear vlan red
	This may disrupt user connectivity.
	Do you wish to continue? (y/n) [n]
	Examples — To turn off these confirmation messages, type the
	following command:
	WX4400# set confirm off
	success: Confirm state is off
set length	Defines the number of lines of CLI output to display between paging
	prompts. MSS displays the set number of lines and waits for you to press
	any key to display another set, or type q to quit the display.

Syntax — set length number-of-lines

„number-of-lines— Number of lines of text to display between paging prompts. You can specify from 0 to 512. The 0 value disables the paging prompt action entirely.

Defaults — MSS displays 24 lines by default.

Access — All.

History — Introduced in MSS Version 3.0.

Usage — Use this command if the output of a CLI command is greater than the number of lines allowed by default for a terminal type.

Examples — To set the number of lines displayed to 100, type the following command:

WX4400# set length 100

success: screen length for this session set to 100