HP Manager Software manual Describes the fields in the display fdb output, See Also „ clear fdb on

100CHAPTER 5: VLAN COMMANDS

The following command displays all entries that begin with the MAC address glob 00:

WX4400# display fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.				[Protocol Type]
VLAN TAG	Dest MAC/Route Des [CoS]		Destination Ports
---- ---- ------------------ -----			-----------------------------------------
1	00:01:97:13:0b:1f		1	[ALL]
1	00:0b:0e:02:76:f5		1	[ALL]
Total Matching FDB Entries Displayed = 2
		Table 20 describes the fields in the display fdb output.
		Table 20 Output for display fdb
		Field	Description
		VLAN	VLAN number.
		TAG	VLAN tag value. If the interface is untagged, the TAG field
			is blank.
		Dest MAC/Route Des	MAC address of this forwarding entry’s destination.
		CoS	Type of entry. The entry types are explained in the first
			row of the command output.
			Note: This Class of Service (CoS) value is not associated
			with MSS quality of service (QoS) features.
		Destination Ports	Wireless LAN switch port associated with the entry. A WX
			switch sends traffic to the destination MAC address
			through this port.
		Protocol Type	Layer 3 protocol address types that can be mapped to this
			entry.
		Total Matching FDB	Number of entries displayed by the command.
		Entries Displayed

See Also

„clear fdb on page 96

„set fdb on page 107