HP Manager Software manual „ set arp on, „ set arp agingtime on, Output for display arp

126CHAPTER 6: IP SERVICES COMMANDS

Table 26 Output for display arp

Field	Description
ARP aging time	Number of seconds a dynamic entry can remain unused
	before MSS removes the entry from the ARP table.
Host	IP address, hostname, or alias.
HW Address	MAC address mapped to the IP address, hostname, or alias.
VLAN	VLAN the entry is for.
Type	Entry type:
	„ DYNAMIC — Entry was learned from network traffic and
	ages out if unused for longer than the ARP aging
	timeout.
	„ LOCAL — Entry for the WX switch’s MAC address. Each
	VLAN has one local entry for the WX switch’s MAC
	address.
	„ PERMANENT — Entry does not age out and remains in
	the configuration even following a reboot.
	„ STATIC — Entry does not age out but is removed after a
	reboot.
State	Entry state:
	„ RESOLVING — MSS sent an ARP request for the entry
	and is waiting for the reply.
	„ RESOLVED — Entry is resolved.

See Also

„set arp on page 141

„set arp agingtime on page 142

display interface Shows the IP interfaces configured on the wireless LAN switch. Syntax — display interface [vlan-id]

„vlan-id— VLAN name or number.

Defaults — If you do not specify a VLAN ID, interfaces for all VLANs are displayed.

Usage — All.

History —Introduced in MSS Version 3.0.