HP Manager Software manual 508

508CHAPTER 16: SESSION MANAGEMENT COMMANDS

Table 93 display sessions network session-id Output

Field	Description
Global Id	A unique session identifier within the Mobility Domain.
State	Status of the session:
	„ AUTH, ASSOC REQ — Client is being associated by the 802.1X
	protocol.
	„ AUTH AND ASSOC — Client is being associated by the 802.1X
	protocol, and the user is being authenticated.
	„ AUTHORIZING — User has been authenticated (for example,
	by the 802.1X protocol and an AAA method), and is entering
	AAA authorization.
	„ AUTHORIZED — User has been authorized by an AAA method.
	„ ACTIVE — User’s AAA attributes have been applied, and the
	user is active on the network.
	„ DEASSOCIATED — One of the following:
	Wireless client has sent the WX switch a disassociate message.
	User associated with one of the current WX switch’s MAP
	access points has appeared at another WX switch in the
	Mobility Domain.
	„ ROAMING AWAY — The WX switch has been sent a request to
	transfer the user, who is roaming, to another WX switch.
	„ STATUS UPDATED — WX switch is receiving a final update
	from an MAP access point about the user, who has roamed
	away.
	„ WEB_AUTHING — User is being authenticated by WebAAA.
	„ WIRED AUTH’ING — User is being authenticated by the
	802.1X protocol on a wired authentication port.
	„ KILLING — User’s session is being cleared, because of 802.1X
	authentication failure, entry of a clear command, or some other
	event.
Port/Radio	Number of the port and radio through which the user is accessing
	this session.
MAC address	MAC address of the session user.
User Name	Name of the authenticated user of this session
IP Address	IP address of the session user.
Vlan Name	Name of the VLAN associated with the session.
Tag	System-wide supported VLAN tag type.