HP Manager Software manual Clear vlan, „ display fdb on

clear vlan 97

The following command clears all dynamic forwarding database entries

	that match all VLANs:
	WX4400# clear fdb dynamic
	success: change accepted.
	The following command clears all dynamic forwarding database entries
	that match ports 3 and 5:
	WX4400# clear fdb port 3,5
	success: change accepted.
	See Also
	„ display fdb on page 98
	„ set fdb on page 107
clear vlan	Removes physical or virtual ports from a VLAN or removes a VLAN
	entirely.
	CAUTION: When you remove a VLAN, MSS completely removes the
	VLAN from the configuration and also removes all configuration
	information that uses the VLAN. If you want to remove only a specific
	port from the VLAN, make sure you specify the port number in the
	command.

Syntax — clear vlan vlan-id [port port-list [tag tag-value]]

„vlan-id— VLAN name or number.

„port port-list— List of physical ports. MSS removes the specified ports from the VLAN. If you do not specify a list of ports, MSS removes the VLAN entirely.

„tag tag-value— Tag number that identifies a virtual port. MSS removes only the specified virtual port from the specified physical ports.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.