HP Manager Software manual Output for display dap global, WX4400# display dap global

296CHAPTER 9: MANAGED ACCESS POINT COMMANDS

Usage — To show information only for Distributed MAPs that have active connections, use the display dap connection command.

Examples — The following command displays configuration information for all Distributed MAPs configured on WX switches in the Mobility Domain:

WX4400# display dap global
Total number of entries: 8			Bias
DAP Serial Id		WX IP Address
--- -----------		---------------	----
1	M9DE48B012F00	10.3.8.111	HIGH
-	M9DE48B012F00	10.4.3.2	LOW
2	M9DE48B123400	10.3.8.111	LOW
-	M9DE48B123400	10.4.3.2	HIGH
17	M9DE48B123600	10.3.8.111	HIGH
-	M9DE48B123600	10.4.3.2	LOW
18	M9DE48B123700	10.3.8.111	LOW
-	M9DE48B123700	10.4.3.2	HIGH

Table 61 describes the fields in this display.

Table 61 Output for display dap global

Field	Description
DAP	Connection ID you assigned to the Distributed MAP.
	Note: DAP numbers are listed only for Distributed MAPs
	configured on this WX switch. If the field contains a
	hyphen ( - ), the Distributed MAP configuration displayed in
	the row of output is on another WX switch.
Serial Id	Serial ID of the Distributed MAP.
WX IP Address	System IP address of the WX switch on which the Distributed
	MAP is configured. A separate row of output is displayed for
	each WX switch on which the Distributed MAP is configured.
Bias	Bias of the WX switch for the Distributed MAP:
	„	High
	„	Low