HP Manager Software manual Display security acl, Map, Security ACL is assigned

432CHAPTER 12: SECURITY ACL COMMANDS

Examples — To display the contents of all security ACLs committed on a

WX switch, type the following command:

WX4400# display security acl info all ACL information for all

set security acl ip acl_123 (hits #5 462)

---------------------------------------------------------

1.permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits

2.deny IP source IP 192.168.2.11 0.0.0.0 destination IP any

set security acl ip acl_134 (hits #3 0)

---------------------------------------------------------

1.permit IP source IP 192.168.0.1 0.0.0.0 destination IP any enable-hits set security acl ip acl_135 (hits #2 0)

---------------------------------------------------------

1.deny IP source IP 192.168.1.1 0.0.0.0 destination IP any enable-hits

The following command displays the contents of acl_123 in the edit buffer, including the committed ACE rules 1 and 2 and the uncommitted rule 3:

WX4400# display security acl info acl_123 editbuffer ACL edit-buffer information for acl_123

set security acl ip acl_123 (ACEs 3, add 3, del 0, modified 0)

---------------------------------------------------------

1.permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits

2.deny IP source IP 192.168.2.11 0.0.0.0 destination IP any

3.deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits

See Also

„clear security acl on page 424

„commit security acl on page 427

„set security acl on page 439

display security acl	Displays the VLANs, ports, and virtual ports on the WX switch to which a
map	security ACL is assigned.

Syntax — display security acl map acl-name

„acl-name— Name of an existing security ACL for which to show static mapping. ACL names must start with a letter and are case-insensitive.

Defaults — None.