HP Manager Software manual Syntax commit security acl acl-nameall

commit security acl 427

To clear all physical ports, virtual ports, and VLANs on a WX switch of the ACLs mapped for incoming and outgoing traffic, type the following command:

WX4400# clear security acl map all success: change accepted.

See Also

„clear security acl on page 424

„display security acl map on page 432

„set security acl map on page 444

commit security acl Saves a security ACL, or all security ACLs, in the edit buffer to the running configuration and nonvolatile storage on the WX switch. Or, when used with the clear security acl command, commit security acl deletes a security ACL, or all security ACLs, from the running configuration and nonvolatile storage.

Syntax — commit security acl {acl-nameall}

„acl-name— Name of an existing security ACL to commit. ACL names must start with a letter and are case-insensitive.

„all — Commits all security ACLs in the edit buffer.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — Use the commit security acl command to save security ACLs into, or delete them from, the permanent configuration. Until you commit the creation or deletion of a security ACL, it is stored in an edit buffer and is not enforced. After you commit a security ACL, it is removed from the edit buffer.

A single commit security acl all command commits the creation and/or deletion of whatever display security acl info all editbuffer shows to be currently stored in the edit buffer.