HP Manager Software manual Save config, „ dir on „ mkdir on, Syntax save config filename

save config 557

History —Introduced in MSS Version 3.0.

Usage — MSS does not allow the subdirectory to be removed unless it is empty. Delete all files from the subdirectory before attempting to remove it.

Examples — The following example removes subdirectory corp2:

WX4400# rmdir corp2 success: change accepted.

See Also

„dir on page 545

„mkdir on page 553

save config Saves the running configuration to a configuration file.

Syntax — save config [filename]

„filename — Name of the configuration file. Specify between 1 and 128 alphanumeric characters, with no spaces.

To save the file in a subdirectory, specify the subdirectory name, followed by a forward slash, in front of the filename. For example: backup_configs/config_c.

Defaults — By default, MSS saves the running configuration as the configuration filename used during the last reboot.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — If you do not specify a filename, MSS replaces the configuration file loaded during the most recent reboot. To display the filename of the configuration file MSS loaded during the most recent reboot, use the display boot command.

The command completely replaces the specified configuration file with the running configuration.