HP Manager Software manual Output for display ap status, WX1200# display ap status

288CHAPTER 9: MANAGED ACCESS POINT COMMANDS

id=0x28f10158a47f0408 ram=33554432 s/n=0332600444 hw_rev=A3

Uptime: 21 hours, 27 minutes, 51 seconds

Radio 1 type: 802.11a, state: configure succeed [Enabled]

operational channel: 64 operational power: 14

base mac: 00:0b:0e:00:d2:c1

bssid1: 00:0b:0e:00:d2:94, ssid: private

The following command displays the status of a directly connected MAP:

WX1200# display ap status 1

Port: 1, AP model: AP2750, manufacturer 3Com, name: MAP01

====================================================

State: operational

CPU info: IBM:PPC speed=266666664 Hz version=405GPr id=0x28b08a1e047f1d0f ram=33554432 s/n=0333000288 hw_rev=A3

Uptime: 3 hours, 44 minutes, 28 seconds

Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect) operational channel: 1 operational power: 15

base mac: 00:0b:0e:00:d1:00

bssid1: 00:0b:0e:00:d1:00, ssid: public

bssid2: 00:0b:0e:00:d1:02, ssid: employee-net

bssid3: 00:0b:0e:00:d1:04, ssid: mycorp-tkip

Table 57 describes the fields in this display.

Table 57 Output for display ap status

Field	Description
DAP	Connection ID for the Distributed MAP.
	Note: This field is applicable only if the MAP is configured on
	the WX switch as a Distributed MAP.
Port	WX port number.
	Note: This field is applicable only if the MAP is directly
	connected to the WX switch and the WX switch’s port is
	configured as an MAP access port.
IP-addr	IP address of the MAP. The address is assigned to the MAP
	by a DHCP server.
	Note: This field is applicable only if the MAP is configured on
	the WX switch as a Distributed MAP.