HP Manager Software manual „ change on, Resets a WX switch’s hardware, Syntax reset

604CHAPTER 22: BOOT PROMPT COMMANDS

Examples — To activate the boot profile in the next slot and display the profile, type the following command:

boot> next

	BOOT Index:	0
	BOOT TYPE:	c
	DEVICE:	boot1:
	FILENAME:	testcfg
	FLAGS:	00000000
	OPTIONS:	run=nos;boot=0
	See Also
	„ change on page 595
	„ create on page 596
	„ delete on page 597
	„ display on page 599
reset	Resets a WX switch’s hardware.
	Syntax — reset
	Defaults — None.
	Access — Boot prompt.
	History —Introduced in MSS Version 3.0.
	Usage — After resetting the hardware, the reset command attempts to
	load a system image file only if other boot settings are configured to do
	so.
	Examples — To immediately reset the system, type the following
	command at the boot prompt:
	boot> reset
	WX Bootstrap 3.1 Release
	Testing Low Memory 1
	Testing Low Memory 2
	CISTPL_VERS_1:	4.1 <SanDisk> <SDP> <5/3 0.6>
	Reset Cause (0x0100) is WARM