HP Manager Software manual „ set ap dap group on, Output for display ap group

286CHAPTER 9: MANAGED ACCESS POINT COMMANDS

Examples — The following command displays information for MAP access point group loadbalance1:

WX1200# display ap group loadbalance1

Load Balance Grp Port Clients			Status	Refused
----------------loadbalance1	---- -------		--------- -------
	1	1	Accepting	0
loadbalance1	6	6	Refusing	2

Table 56 describes the fields in this display.

Table 56 Output for display ap group

Field	Description
Load Balance Grp	Name of the MAP access point group.
Port	WX port number.
Clients	Number of active client sessions on the MAP access point.
Status	Association status of the MAP access point:
	„ Accepting — The MAP access point is accepting new
	associations.
	„ Refusing — The MAP access point is refusing new
	associations.
Refused	Number of association requests refused by the MAP access
	point due to load balancing. MSS resets this counter to 0
	when the WX switch is restarted, MSS is reloaded, or the
	access point is removed from the group.

See Also

„“set {ap dap} group” on page 313