HP Manager Software manual Set arp, „ traceroute on

set arp 141

„ size — 56. Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — To stop a ping command that is in progress, press Ctrl+C.

Examples — The following command pings a WX switch that has IP address 10.1.1.1:

WX1200# ping 10.1.1.1
PING 10.1.1.1		(10.1.1.1) from 10.9.4.34 : 56(84) bytes of data.
64	bytes from	10.1.1.1: icmp_seq=1 ttl=255	time=0.769 ms
64	bytes from	10.1.1.1: icmp_seq=2 ttl=255	time=0.628 ms
64	bytes from	10.1.1.1: icmp_seq=3 ttl=255	time=0.676 ms
64	bytes from	10.1.1.1: icmp_seq=4 ttl=255	time=0.619 ms
64	bytes from	10.1.1.1: icmp_seq=5 ttl=255	time=0.608 ms
--- 10.1.1.1 ping statistics ---			0 errors, 0% packet loss
5 packets transmitted, 5 packets received,

	See Also
	„ traceroute on page 196
set arp	Adds an ARP entry to the ARP table.
	Syntax — set arp {permanent static dynamic }
	ip-addr mac-addr
	„ permanent — Adds a permanent entry. A permanent entry does not
	age out and remains in the database even after a reboot, reset, or
	power cycle.
	„ static — Adds a static entry. A static entry does not age out, but the
	entry does not remain in the database after a reboot, reset, or power
	cycle.
	„ dynamic — Adds a dynamic entry. A dynamic entry is automatically
	removed if the entry ages out, or after a reboot, reset, or power cycle.
	„ ip-addr— IP address of the entry, in dotted decimal notation.
	„ mac-addr— MAC address to map to the IP address. Use colons to
	separate the octets (for example, 00:11:22:aa:bb:cc).
	Defaults — The default aging timeout is 1200 seconds.