HP Manager Software manual Set timezone, It is enabled, WX1200# set timezone PST

set timezone 181

set timezone	Sets the number of hours, and optionally the number of minutes, that the
	wireless LAN switch’s real-time clock is offset from Coordinated Universal
	Time (UTC). These values are also used by Network Time Protocol (NTP), if
	it is enabled.

Syntax — set timezone zone-name {-hours [minutes]}

„zone-name— Time zone name of up to 32 alphabetic characters. You can use a standard name or any name you like.

„- (minus sign) — Minus time to indicate hours (and minutes) to be subtracted from UTC. Otherwise, hours and minutes are added by default.

„hours — Number of hours to add or subtract from UTC.

„minutes — Number of minutes to add or subtract from UTC.

Defaults — If this command is not used, then the default time zone is

UTC.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — To set the time zone for Pacific Standard Time (PST), type the following command:

WX1200# set timezone PST -8

Timezone is set to 'PST', offset from UTC is -8:0 hours.

See Also

„clear snmp usm on page 122

„clear timezone on page 124

„display summertime on page 138

„display timedate on page 138

„display timezone on page 139

„set summertime on page 177

„set timedate on page 180