HP Manager Software manual Set dot1x, Authcontrol, Port-control command

486CHAPTER 15: 802.1X MANAGEMENT COMMANDS

Table 87 display dot1x stats Output

Field	Description
Enters Connecting	Number of times that the WX switch state transitions to the
	CONNECTING state from any other state.
Logoffs While	Number of times that the WX switch state transitions from
Connecting	CONNECTING to DISCONNECTED as a result of receiving an
	EAPoL-Logoff message.
Enters Authenticating	Number of times that the state wildcard transitions.
Success While	Number of times the WX switch state transitions from
Authenticating	AUTHENTICATING from AUTHENTICATED, as a result of an
	EAP-Response/Identity message being received from the
	supplicant (client).
Timeouts While	Number of times that the WX switch state wildcard
Authenticating	transitions from AUTHENTICATING to ABORTING.
Failures While	Number of times that the WX switch state wildcard
Authenticating	transitions from AUTHENTICATION to HELD.
Reauths While	Number of times that the WX switch state wildcard
Authenticating	transitions from AUTHENTICATING to ABORTING, as a result
	of a reauthentication request (reAuthenticate = TRUE).
Starts While	Number of times that the WX switch state wildcard
Authenticating	transitions from AUTHENTICATING to ABORTING, as a result
	of an EAPoL-Start message being received from the
	Supplicant (client).
Logoffs While	Number of times that the WX switch state wildcard
Authenticating	transitions from AUTHENTICATING to ABORTING, as a result
	of an EAPoL-logoff message being received from the
	Supplicant (client).
Bad Packets Received	Number of EAPoL packets received that have an invalid
	version or type.

set dot1x	Provides a global override mechanism for 802.1X authentication
authcontrol	configuration on wired authentication ports.
	Syntax — set dot1x authcontrol {enable disable}
	„ enable — Allows all wired authentication ports running 802.1X to
	use the authentication specified per port by the set dot1X
	port-control command.
	„ disable — Forces all wired authentication ports running 802.1X to
	unconditionally accept all 802.1X authentication attempts with an
	EAP Success message (ForceAuth).