HP Manager Software manual Radio-profile, Displays radio profile information

298CHAPTER 9: MANAGED ACCESS POINT COMMANDS

Table 62 describes the fields in this display.

Table 62 Output for display dap unconfigured

	Field	Description
	Serial Id	Serial ID of the Distributed MAP.
	Model	MAP model number.
	IP Address	IP address of the MAP. This is the address that the MAP
		receives from a DHCP server. The MAP uses this address to
		send a Find WX message to request configuration
		information from WX switches. However, the MAP cannot
		use the address to establish a connection unless the MAP
		first receives a configuration from an WX switch.
	Port	Port number on which this WX switch received the MAP’s
		Find WX message.
	VLAN	VLAN on which this WX switch received the MAP’s Find
		WX message.
	See Also
	„ display dap connection on page 294
	„ display dap global on page 295
display	Displays radio profile information.
radio-profile	Syntax — display radio-profile {name ?}

„ name — Displays information about the named radio profile. „ ? — Displays a list of radio profiles.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — MSS contains a default radio profile. 3Com recommends that you do not change this profile but instead keep the profile for reference.

Examples — The following command shows radio profile information for the default radio profile: