HP Manager Software manual See Also „ clear radio-profileon „ set radio-profile mode on

276CHAPTER 9: MANAGED ACCESS POINT COMMANDS

success: change accepted.

WX4400# clear service-profile svcprof6 success: change accepted.

See Also

„clear radio-profileon page 274

„set radio-profile mode on page 342

clear service-profileRemoves a service profile or resets one of the profile’s parameters to its default value.

Syntax — clear service-profile name

„name — Service profile name.

Defaults — None.

Access — Enabled.

History —Introduced in MSS 3.0.

Usage — If the service profile is mapped to a radio profile, you must remove it from the radio profile first. (After disabling all radios that use the radio profile, use the clear radio-profilename service-profilename command.)

Examples — The following commands disable the radios that are using radio profile rp6, remove service-profile svcprof6 from rp6, then clear svcprof6 from the configuration.

WX1200# set radio-profile rp6 mode disable

WX1200# clear radio-profile rp6 service-profile svcprof6 success: change accepted.

WX1200# clear service-profile svcprof6 success: change accepted.

See Also

„clear radio-profileon page 274

„set radio-profile mode on page 342