HP Manager Software manual Set mobility-domain mode seed domain-name

set mobility-domain mode seed domain-name 267

set mobility-domain mode seed domain-name

Creates a Mobility Domain by setting the current WX switch as the seed device and naming the Mobility Domain.

Syntax — set mobility-domain mode seed domain-name

mob-domain-name

„mob-domain-name— Name of the Mobility Domain. Specify between 1 and 16 characters with no spaces.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — Before you use this command, the current WX switch must have its IP address set with the set system ip-addresscommand. After you enter this command, all Mobility Domain traffic is sent and received from the specified IP address.

You must explicitly configure only one WX switch per domain as the seed. All other WX switches in the domain receive their Mobility Domain information from the seed.

Examples — The following command creates a Mobility Domain named Pleasanton with the current WX switch as the seed:

WX4400# set mobility-domain mode seed domain-name Pleasanton mode is: seed

domain name is: Pleasanton

See Also

„clear mobility-domain member on page 262

„display mobility-domain status on page 263