HP Manager Software manual See Also „ display dot1x on

set dot1x max-req 489

Examples — Type the following command to enable key transmission:

WX4400# set dot1x key-tx enable success: dot1x key transmission enabled.

See Also

„display dot1x on page 483

set dot1x max-reqSets the maximum number of times the WX retransmits an EAP request to a supplicant (client) before ending the authentication session.

Syntax — set dot1x max-reqnumber-of-retransmissions

„number-of-retransmissions— Specify a value between 0 and 10.

Defaults — The default number of EAP retransmissions is 2.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — To support SSIDs that have both 802.1X and static WEP clients, MSS sends a maximum of two ID requests, even if this parameter is set to a higher value. Setting the parameter to a higher value does affect all other types of EAP messages.

Examples — Type the following command to set the maximum number of EAP request retransmissions to three attempts:

WX4400# set dot1x max-req 3 success: dot1x max request set to 3.

See Also

„clear dot1x max-reqon page 479

„display dot1x on page 483