HP Manager Software manual Set service-profile, Cipher-ccmp

356CHAPTER 9: MANAGED ACCESS POINT COMMANDS

	History —Introduced in MSS Version 3.0.
	Examples — The following command disables beaconing of the SSID
	managed by service profile sp2:
	WX4400# set service-profile sp2 beacon disable
	success: change accepted.
	See Also
	„ display service-profileon page 302
	„ set radio-profilebeacon-intervalon page 336
	„ set service-profilessid-nameon page 363
	„ set service-profilessid-typeon page 364
set service-profile	Enables Counter with Cipher Block Chaining Message Authentication
cipher-ccmp	Code Protocol (CCMP) encryption with WPA clients, for a service profile.
	Syntax — set service-profile name cipher-ccmp
	{enable disable}
	„ name — Service profile name.
	„ enable — Enables CCMP encryption for WPA clients.
	„ disable — Disables CCMP encryption for WPA clients.
	Defaults — CCMP encryption is disabled by default.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — To use CCMP, you must also enable the WPA IE.
	Examples — The following command configures service profile sp2 to
	use CCMP encryption:
	WX4400# set service-profile sp2 cipher-ccmp enable
	success: change accepted.

See Also

„set service-profilecipher-tkipon page 357

„set service-profilecipher-wep104on page 358