HP Manager Software manual Neighbors, 3Com radio can hear, Syntax display auto-tune neighbors

292CHAPTER 9: MANAGED ACCESS POINT COMMANDS

„display radio-profileon page 298

„set {ap dap} radio auto-tunemax-poweron page 317

„set {ap dap} radio auto-tune max- retransmissions on page 318

„set radio-profileauto-tunechannel-configon page 330

„set radio-profileauto-tunechannel-holddownon page 331

„set radio-profileauto-tunechannel-intervalon page 332

„set radio-profileauto-tunepower-backoff- timer on page 333

„set radio-profileauto-tunepower-configon page 334

„set radio-profileauto-tunepower-intervalon page 335

display auto-tune	Displays the other 3Com radios and third-party 802.11 radios that a
neighbors	3Com radio can hear.
	Syntax — display auto-tune neighbors
	[ap map-num[radio {1 2all}]]

Syntax — display auto-tune neighbors [dap dap-num[radio {1 2all}]]

„map-num— MAP port connected to the MAP access point for which to display neighbors.

„dap-num— Number of a Distributed MAP for which to display neighbors.

„radio 1 — Shows neighbor information for radio 1.

„radio 2 — Shows neighbor information for radio 2. (This option does not apply to single-radio models.)

„radio all — Shows neighbor information for both radios.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.