HP Manager Software manual Set service-profile wep active-multicast- index, „ copy on „ dir on

	set service-profile wep active-multicast- index 367
Total:	1839 bytes used, 206577 Kbytes free

WX4400# set service-profile corpa-service web-aaa-form corpa-ssid/ corpa-login.html

success: change accepted.

See Also

„copy on page 542

„dir on page 598

„display service-profileon page 302

„mkdir on page 553

„set port type wired-authon page 91

„set service-profileauth-fallthruon page 352

„set web-aaaon page 260

set service-profile wep active-multicast- index

Specifies the static Wired-Equivalent Privacy (WEP) key (one of four) to use for encrypting multicast frames.

Syntax — set service-profile

name wep active-multicast-index num

„name — Service profile name.

„num — WEP key number. You can enter a value from 1 through 4.

Defaults — If WEP encryption is enabled and WEP keys are defined, MAP radios use WEP key 1 to encrypt multicast frames, by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — Before using this command, you must configure values for the WEP keys you plan to use. Use the set service-profile wep key-indexcommand.

Examples — The following command configures service profile sp2 to use WEP key 2 for encrypting multicast traffic:

WX4400# set service-profile sp2 wep active-multicast-index 2 success: change accepted.