HP Manager Software manual Port-control, „ set dot1x max-reqon

clear dot1x max-req 479

clear dot1x max-reqResets to the default setting the number of Extensible Authentication

	Protocol (EAP) requests that the WX switch retransmits to a supplicant
	(client).
	Syntax — clear dot1x max-req
	Defaults — The default number is 20.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — To reset the number of 802.1X requests the WX can send
	to the default setting, type the following command:
	WX4400# clear dot1x max-req
	success: change accepted.
	See Also
	„ display dot1x on page 483
	„ set dot1x max-reqon page 489
clear dot1x	Resets all wired authentication ports on the WX switch to default 802.1X
port-control	authentication.
	Syntax — clear dot1x port-control
	By default, all wired authentication ports are set to auto and they process
	authentication requests as determined by the set authentication dot1X
	command.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — This command is overridden by the set dot1x authcontrol
	command. The clear dot1x port-controlcommand returns port control
	to the method configured. This command applies only to wired
	authentication ports.