HP Manager Software manual Display port, Counters

66CHAPTER 4: PORT COMMANDS

Table 10 Network port defaults (continued)

Port Parameter	Setting
Spanning Tree Protocol (STP)	Based on the VLAN(s) you add the port to.
802.1X	No authorization.
Port groups	None.
Internet Group Management	Enabled as port is added to VLANs.
Protocol (IGMP) snooping
Access point and radio	Not applicable
parameters
Maximum user sessions	Not applicable

	Examples — The following command clears port 5:
	WX1200# clear port type 5
	This may disrupt currently authenticated users.
	Are you sure? (y/n) [n]y
	success: change accepted.
	See Also
	„ set port type ap on page 87
	„ set port type wired-authon page 91
display port	Displays port statistics.
counters	Syntax — display port counters
	[octets packets receive-errors transmit-errors
	collisions receive-etherstats
	transmit-etherstats] [port port-list]
	„ octets — Shows octet statistics.
	„ packets — Shows packet statistics.
	„ receive-errors— Shows errors in received packets.
	„ transmit-errors— Shows errors in transmitted packets.
	„ collisions — Shows collision statistics.
	„ receive-etherstats— Shows Ethernet statistics for received
	packets.
	„ transmit-etherstats— Shows Ethernet statistics for transmitted
	packets.