HP Manager Software manual See Also „ display igmp statistics on

set igmp mrouter 413

set igmp mrouter Adds or removes a port in a WX’s list of ports on which it forwards traffic to multicast routers. Static multicast ports are immediately added to or removed from the list of router ports and do not age out.

Syntax — set igmp mrouter port port-list{enable disable}

„port port-list— Port list. MSS adds or removes the specified ports in the list of static multicast router ports.

„enable — Adds the port to the list of static multicast router ports.

„disable — Removes the port from the list of static multicast router ports.

Defaults — By default, no ports are static multicast router ports.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — You cannot add MAP access ports or wired authentication ports as static multicast ports. However, MSS can dynamically add these port types to the list of multicast ports based on multicast traffic.

Examples — The following command adds port 6 as a static multicast router port:

WX1200# set igmp mrouter port 6 enable success: change accepted.

The following command removes port 6 from the static multicast router port list:

WX1200# set igmp mrouter port 6 disable success: change accepted.

See Also

„display igmp statistics on page 409