HP Manager Software manual Set port type, Wired-auth, „ set ap dap radio antennatype on, Command

set port type wired-auth 91

	The following command resets port 5 by clearing it:
	WX1200# clear port type 5
	This may disrupt currently authenticated users.
	Are you sure? (y/n) [n]y
	success: change accepted.
	See Also
	„ clear dap on page 62
	„ clear port type on page 65
	„ set {ap dap} radio antennatype on page 315
	„ set dap on page 77
	„ set port type wired-authon page 91
	„ set radio-profile11g-onlyon page 329
	„ set system countrycode on page 54
set port type	Configures a WX switch port for a wired authentication user.
wired-auth	Before changing the port type from ap to wired-author from
	wired-authto ap, you must reset the port with the clear port type
	command.
	Syntax — set port type wired-auth port-list[tag tag-list]
	[max-sessionsnum] [auth-fall-thru {last-resort none web
	portal}]
	„ port-list— List of physical ports.
	„ tag-list— One or more numbers between 1 and 4094 that
		subdivide a wired authentication port into virtual ports.
	„ num — Maximum number of simultaneous user sessions supported.
	„	last resort — Automatically authenticates the user, without
		requiring a username and password.
	„ none— Denies authentication and prohibits the user from accessing
		the network over this port.
	„	web portal — Serves the user a web page from the WX switch’s
		nonvolatile storage for secure login to the network.