HP Manager Software manual Opens a Telnet client session with a remote device, WX4400# telnet

telnet 195

telnet Opens a Telnet client session with a remote device.

Syntax — telnet {ip-addr hostname} [port port-num]

„ip-addr— IP address of the remote device.

„hostname — Hostname of the remote device.

„port port-num— TCP port number on which the TCP server on the remote device listens for Telnet connections.

Defaults — MSS attempts to establish Telnet connections with TCP port 23 by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — To end a Telnet session from the remote device, press Ctrl+t or type quit or logout in the management session on the remote device. To end a client session from the local WX switch, use the clear sessions telnet client command.

If the configuration of the WX switch from which you enter the telnet command has an ACL that denies Telnet client traffic, the ACL also denies access by the telnet command.

Examples — In the following example, an administrator establishes a Telnet session with another device and enters a command on the remote device:

WX4400# telnet 10.10.10.90

Session 0 pty tty2.d Trying 10.10.10.90...

Connected to 10.10.10.90

Disconnect character is '^t'

Copyright (c) 2004 3Com Corporation. All rights reserved.

Username: username
Password: password
WX1200-remote> display vlan			VLAN	Tunl			Port
VLAN	Name	Admin			Port	Tag
		Status	State	Affin			State
----	----------------	------	-----	-----	---------------- -----		-----
1	default	Up	Up	5	3	none Up