HP Manager Software manual Syntax set ip telnet server enable disable

set ip telnet server 157

See Also

„clear ip telnet on page 119

„display ip https on page 129

„display ip telnet on page 133

„set ip https server on page 150

„set ip telnet server on page 157

set ip telnet server Enables the Telnet server on a wireless LAN switch.

CAUTION: If you disable the Telnet server, Telnet access to the WX switch is also disabled.

Syntax — set ip telnet server {enable disable}

„enable — Enables the Telnet server.

„disable — Disables the Telnet server.

Defaults — The Telnet server is disabled by default.

Access — Enabled.

Usage — The maximum number of Telnet sessions supported on a WX switch is eight. If SSH is also enabled, the WX switch can have up to eight Telnet or SSH sessions, in any combination, and one console session.

Examples — The following command enables the Telnet server on a WX switch:

WX4400# set ip telnet server enable success: change accepted.

See Also

„clear ip telnet on page 119

„display ip https on page 129

„display ip telnet on page 133

„set ip https server on page 150

„set ip telnet on page 156