HP Manager Software manual Output for display snmp notification target

190CHAPTER 6: IP SERVICES COMMANDS

retry count=snmp-engine-id timeout=1

Table 40 describes the fields in this display.

Table 40 Output for display snmp notification target

Field	Description
user	Name of the SNMP user.
engineID	SNMP engine ID associated with the user. For traps, the
	engine ID is local. For informs, the engine ID is that of
	the notification receiver.
notify profile	Name of the notification profile used by the target.
security model	SNMP security model:
	„	v1
	„	v2c
	„	usm
security type	Security requirements for exchanging messages with
	the target:
	„ unsecured—SNMP message exchanges are not
		secure.
	„ authenticated—SNMP message exchanges are
		authenticated but are not encrypted.
	„ encrypted—SNMP message exchanges are
		authenticated and encrypted.
notify type	Type of notification sent to the target:
	„	inform
	„	trap
retry count	Number of times MSS will resend an unacknowledged
	inform.
timeout	Number of seconds MSS waits for acknowledgement of
	an inform before resending the inform (if retries are
	available).

See Also

„clear snmp notify target on page 121

„set snmp notify target on page 162