Nortel Networks 214393-A manual Setting the Device Manager properties

20Chapter 1 Device Manager basics

Note: On startup, Device Manager performs a DNS lookup for the machine on which it is running. If the DNS lookup is slow or fails, the initial Device Manager window may take up to 30 seconds to open.

Figure 1 Device Manager window

Setting the Device Manager properties

Device Manager communicates with the BayStack 380-24F switch using Simple Network Management Protocol (SNMP). The software is shipped with default values set for important communication parameters, such as the polling interval, timeout, and retry count. You may want to set the parameters before you open a device to manage.

To set the Device Manager properties:

1Choose Device > Properties.

The Properties dialog box opens (Figure 2).

214393-A