Nortel Networks 214393-A Setting up MultiLink Trunk ports, Ethernet Errors tab fields continued

	Chapter 4 Setting up MultiLink Trunk ports 103
Table 39 Ethernet Errors tab fields (continued)
Field	Description
FrameTooLong	A count of frames received on a particular MLT that exceed the
	maximum permitted frame size. The count represented by an
	instance of this object is incremented when the frameTooLong
	status is returned by the MAC service to the LLC (or other MAC
	user). Received frames for which multiple error conditions
	occur are, according to the conventions of IEEE 802.3 Layer
	Management, counted exclusively according to the error status
	presented to the LLC.
SQETestError	A count of times that the SQE TEST ERROR message is
	generated by the PLS sublayer for a particular MLT. The SQE
	TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/
	IEEE 802.3-1985 and its generation is described in section
	7.2.4.6 of the same document.
DeferredTransmiss	A count of frames for which the first transmission attempt on a
	particular MLT is delayed because the medium is busy. The
	count represented by an instance of this object does not include
	frames involved in collisions.
SingleCollFrames	A count of successfully transmitted frames on a particular MLT
	for which transmission is inhibited by exactly one collision. A
	frame that is counted by an instance of this object is also
	counted by the corresponding instance of either the
	ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and
	is not counted by the corresponding instance of the
	MultipleCollisionFrames object.
MultipleCollFrames	A count of successfully transmitted frames on a particular MLT
	for which transmission is inhibited by more than one collision. A
	frame that is counted by an instance of this object is also
	counted by the corresponding instance of either the
	ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and
	is not counted by the corresponding instance of the
	SingleCollisionFrames object.
LateCollisions	The number of times that a collision is detected on a particular
	MLT later than 512 bit-times into the transmission of a packet.
	Five hundred and twelve bit-times corresponds to 51.2
	microseconds on a 10 Mb/s system. A (late) collision included
	in a count represented by an instance of this object is also
	considered as a (generic) collision for purposes of other
	collision-related statistics.
ExcessiveColls	A count of frames for which transmission on a particular MLT
	fails due to excessive collisions.

Reference for the BayStack 380-24F Gigabit Switch Management Software