90549168 SS12D, SS14, SS18 Smart Select 6/2/09 10:07 AM Page 10
TROUBLESHOOTING
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Battery pack not installed properly. | • Check battery pack |
|
| installation. |
| • Battery pack not charged. | • Check battery pack charging |
|
| requirements. |
•Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into charger until red LED appears.
• Charger not plugged in. | • Plug charger into a working |
| outlet. Refer to “Important |
| Charging Notes” for more |
| details. |
• Surrounding air temperature | • Move charger and battery |
too hot or too cold. | pack to a surrounding air |
| temperature of above 40 |
| degrees F (4.5°C) or below |
| 105 degrees F (+40.5°C). |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling Corporation)
Seal on the
recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent
RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickel- cadmium batteries. Help protect our environment and conserve natural resources by returning the spent
10
