NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Factory Default Settings
You can return the gateway to its factory settings. On the rear panel of the gateway, press and hold the Reset button for over 7 seconds. The gateway resets and returns to the factory configuration settings shown in the following table.
Table 2. Factory default settings
Feature | Parameter | Default | |
Gateway login | User login URL | http://192.168.0.1 | |
|
|
| |
| User name and password | admin/password | |
|
| ||
|
|
| |
Local network | LAN IP | 192.168.0.1 | |
(LAN) |
|
| |
Subnet mask | 255.255.255.0 | ||
| |||
|
|
| |
| DHCP server | Enabled | |
|
|
| |
| DHCP starting IP address | 192.168.0.2 | |
|
|
| |
| DHCP Ending IP address | 192.168.0.254 | |
|
|
| |
Firewall | Inbound communication from the | Disabled (except traffic on port 80, the HTTP port) | |
| Internet |
| |
|
|
| |
| Outbound communication to the | Enabled (all) | |
| Internet |
| |
|
|
| |
| Source MAC filtering | Disabled | |
|
|
| |
Internet | WAN MAC address | Use default hardware address. | |
connection |
|
| |
WAN MTU size | 1500 | ||
| |||
|
|
|
Supplemental Information
54
