Allied Telesis management software layer 2+ fast ethernet switches manual Volatile, Nonvolatile

Chapter 7: SNMPv3 Commands

volatile	Does not allow you to save the table
	entry to the configuration file on the
	switch. This is the default.
nonvolatile	Allows you to save the table entry to
	the configuration file on the switch.

Description

This command creates an SNMPv3 User Table entry.

Examples

The following command creates an SNMPv3 user with the name “steven142” with an authentication protocol of MD5, an authentication password of “99doublesecret12”, a privacy password of “encrypt178” and a storage type of nonvolatile.

add snmpv3 user=steven142 authentication=md5 authpassword=99doublesecret12 privpassword=encrypt178 storagetype=nonvolatile

The following command creates an SNMPv3 user with the name “77hoa” an authentication protocol of SHA, an authentication password of “youvegottobekidding88” and a storage type of nonvolatile.

add snmpv3 user=77hoa authentication=sha authpassword=youvegottobekidding88 storagetype=nonvolatile

102