AT-S62 Command Line User’s Guide

Note

For a list of the default values, refer to Appendix A in the AT-S62 Management Software Menus Interface User’s Guide.

Note

The switch will not forward traffic during the reset process, which takes 20 to 30 seconds. Some network traffic may be lost.

Your local or remote management session with the switch ends when the unit is reset. You must reestablish the session to continue managing the unit.

Example

The following command configures the switch using the configuration file SWITCH12.CFG:

restart switch config=switch12.cfg

The following command resets the switch to its default values:

restart switch config=none

53

Page 53
Image 53
Allied Telesis management software layer 2+ fast ethernet switches manual Restart switch config=switch12.cfg