Allied Telesis management software layer 2+ fast ethernet switches manual

Chapter 6

SNMPv1 and SNMPv2 Community Strings and Trap Commands

This chapter contains the following commands:

❑ADD SNMP COMMUNITY on page 81

❑CREATE SNMP COMMUNITY on page 83

❑DELETE SNMP COMMUNITY on page 86

❑DESTROY SNMP COMMUNITY on page 88

❑DISABLE SNMP on page 89

❑DISABLE SNMP AUTHENTICATETRAP on page 90

❑DISABLE SNMP COMMUNITY on page 91

❑ENABLE SNMP on page 92

❑ENABLE SNMP AUTHENTICATETRAP on page 93

❑ENABLE SNMP COMMUNITY on page 94

❑SET SNMP COMMUNITY on page 95

❑SHOW SNMP on page 97

Note

Remember to save your changes with the SAVE CONFIGURATION command.

Note

Refer to the AT-S62 Management Software Menus Interface User’s

Guide for background information on SNMP.

80