AT-S62 Command Line User’s Guide
457
SHOW GARP COUNTER
Syntax
show garp=gvrp counter
Parameter
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S62
management software is GVRP.
Description
This command displays the current values for the following GARP packet
and message counters:
❑GARP application
❑Receive: Total GARP Packets
❑Transmit: Total GARP Packets
❑Receive: Invalid GARP Packets
❑Receive Discarded: GARP Disabled
❑Receive DIscarded: Port Not Listening
❑Transmit Discarded: Port Not Sending
❑Receive Discarded: Invalid Port
❑Receive Discarded: Invalid Protocol
❑Receive Discarded: Invalid Format
❑Receive Discarded: Database Full
❑Receive GARP Messages: LeaveAll
❑Transmit GARP Messages: LeaveAll
❑Receive GARP Messages: JoinEmpty
❑Transmit GARP Messages: JoinEmpty
❑Receive GARP Messages: JoinIn
❑Transmit GARP Messages: JoinIn
❑Receive GARP Messages: LeaveEmpty