TOA Electronics C-A711DM instruction manual Installation, Specifications

3. INSTALLATION

Detach the pre-installed transparent cover from the camera, and attach the Smoked Dome Cover instead. For attaching procedures, refer to the installation manual supplied with the Camera.

Be sure to attach the Smoked Dome Cover to the Camera after hanging the safety wire.

4. SPECIFICATIONS

Finish	Cover: PC resin, Light gray
	Dome: PC resin, Smoked (Transmission factor: 30%)*
Dimensions	ø 219.8 x 115 (H) mm (Dome: ø 150 mm)
Applicable Camera	C-CC714, C-CC764

*The object illumination of the camera equipped with the C-A711DM needs approximately 3.3 times that of the C-CC714 and C-CC764 Camera with the pre-installed dome cover.

Note: The design and specifications are subject to change without notice for improvement.

Printed in Japan 133-12-951-70