Allied Telesis management software layer 2+ fast ethernet switches Reset Switch, Reset switch

AT-S62 Command Line User’s Guide

RESET SWITCH

Syntax

reset switch

Parameters

None.

Description

This command does all of the following:

❑Performs a soft reset on all ports. The reset takes less than a second to complete. The ports retain their current operating parameter settings. To perform this function on individual ports, refer to RESET SWITCH PORT on page 165.

❑Resets the statistics counters on all ports to zero. To perform this function on individual ports, refer to RESET SWITCH PORT COUNTER on page 224.

❑Deletes all dynamic MAC addresses from the MAC address table. To perform this function on individual ports, refer to RESET SWITCH FDB on page 181.

Example

This command performs the functions described above:

reset switch

49