Allied Telesis management software layer 2+ fast ethernet switches manual Save LOG

Chapter 17: Event Log and Syslog Server Commands

SAVE LOG

Syntax

save log=temporary filename=”filename.log” [full] [module=module] [reverse] [severity=severity] [overwrite]

Parameters
log	Specifies the location of the event log whose
	messages you want to save. There is only one
	option:
	temporary Specifies temporary memory. The log
	has a storage capacity of 4,000
	events.
filename	Specifies the filename for the log. The name can be
	up to 16 alphanumeric characters, followed by the
	extension ”.log.” Spaces are allowed. The filename
	must be enclosed in quotes if it contains spaces.
	Otherwise, the quotes are optional.
full	Specifies the amount of information saved to the
	log. Without this option, the log saves only the time,
	module, severity, and description for each entry.
	With it, the log also saves the filename, line number,
	and event ID.
module	Specifies the AT-S62 module whose events are to be
	saved. For a list of modules, refer to Table 4 on
	page 279. Omitting this parameter saves messages
	from all modules.
reverse	Specifies the order in which the events are saved in
	the log. With this option, the events are saved
	newest to oldest. Without it, the events are saved
	oldest to newest.
severity	Specifies the severity of events to be saved to the log
	file. Choices are I for Informational, E for Error, W for
	Warning, and D for Debug. You can specify more
	than one severity (for example, E,W). For a definition
	of the severity levels, see Table 5, “Event Log Severity
	Levels” on page 281. Omitting this parameter saves
	messages of all severity levels.

272