Allied Telesis management software layer 2+ fast ethernet switches Create Vlan Portprotected

Chapter 30: IGMP Snooping Commands

CREATE VLAN PORTPROTECTED

Syntax

create vlan=name vid=vid portprotected

Parameters
vlan	Specifies the name of the new protected ports
	VLAN. The name can be from one to fifteen
	alphanumeric characters in length. The name should
	reflect the function of the nodes that will be a part of
	the protected ports VLAN (for example,
	InternetGroups). The name cannot contain spaces or
	special characters, such as an asterisk (*) or
	exclamation point (!).
vid	Specifies a VID for the new protected ports VLAN.
	The range is 2 to 4094. This number must be unique
	from the VIDs of all other tagged, untagged, and
	port protected VLANs on the switch.
Description

This command is the first step to creating a protected ports VLAN. This command assigns a name and VID to the VLAN. The second step is to specify an uplink port and the port groups using ADD VLAN GROUP on page 463.

Example

The following command creates a protected ports VLAN called

InternetGroups and assigns it a VID of 12:

create vlan=InternetGroups vid=12 portprotected

466