Allied Telesis management software layer 2+ fast ethernet switches manual ADD QOS Policy, 11,12

AT-S62 Command Line User’s Guide

ADD QOS POLICY

Syntax

add qos policy=integer trafficclasslist=integers

Parameter
policy	Specifies the ID number of the policy you want to
	modify. You can modify only one policy at a time.
trafficclasslist	Specifies the new traffic classes of the policy. Traffic
	classes already assigned to the policy are retained.
	Separate multiple traffic classes with commas (e.g.,
	4,11,12).
Description

This command adds traffic classes to an existing policy. The traffic classes must already exist. Any traffic classes already assigned to the policy are retained by the policy. To add traffic classes while removing those already assigned, refer to SET QOS POLICY on page 333.

Example

This command adds the traffic class 16 to policy 11:

add qos policy=11 trafficclasslist=16

309