Chapter 24: Denial of Service (DoS) Commands
370
SET DOS LAND
Syntax
set dos land port=port state=enable|disable
[mirrorport=port]
Parameters
port Specifies the switch port on which you want to enable
or disable the Land defense. You can specify more
than one port at a time.
state Specifies the state of the Land defense. The options
are:
enable Activates the defense.
disable Deactivates the defense. This is the default.
mirrorport Specifies a port where invalid traffic is copied. You can
specify only one port.
Description
This command enables and disables the Land DoS defense. For an
explanation of this attack and the AT-S62 defense mechanism, refer to
the AT-S62 Management Software Menus Interface User’s Guide.
Examples
The following activates the Land defense on ports 5 and 7:
set dos land port=5,7 state=enable