Allied Telesis management software layer 2+ fast ethernet switches Starting a Management Session

AT-S62 Command Line User’s Guide

Starting a Management Session

In order to manage an AT-8500 Series switch using command line commands, you must first start a local or Telnet management session. For instructions, refer to the AT-S62 Management Software Menus Interface User’s Guide.

The default management interface is the command line. The prompt that you will see will differ depending on whether you logged in as Manager or Operator. If you logged in as Manager, you will see “#.” If you logged in as Operator, you will see “$.” You can now manage the switch with the command line commands.

If you prefer to use the menu interface instead of the command line, type MENU at the command prompt and press Return. To make the menu interface as the default management interface, refer to SET SWITCH CONSOLEMODE on page 28.

Note

Web browser management does not support the command line interface.

17