AT-S62 Command Line User’s Guide

SET SWITCH INFILTERING

Syntax

set switch infiltering=yesnoonofftruefalse

Parameters

 

 

infiltering

Specifies the operating status of ingress filtering. The

 

options are:

 

 

yes, on, true

Activates ingress filtering. The

 

 

values are equivalent. This is the

 

 

default.

 

no, off, false

Deactivates ingress filtering. The

 

 

values are equivalent.

Description

This command controls the status of ingress filtering. When ingress filtering is activated, which is the default, tagged frames are filtered when they are received on a port. When ingress filtering is deactivated, tagged frames are filtered before they are transmitted out a port. To view the current setting, use the SHOW SWITCH on page 68. For further information on ingress filtering, refer to the AT-S62 Management Software Menus Interface User’s Guide.

Example

The following command deactivates ingress filtering:

set switch infiltering=off

443

Page 443
Image 443
Allied Telesis management software layer 2+ fast ethernet switches SET Switch Infiltering, Set switch infiltering=off