AT-S62 Command Line User’s Guide
83
CREATE SNMP COMMUNITY
Syntax
create snmp community=”community”
[access=read|write]
[open=yes|no|on|off|true|false]
[traphost=ipaddress] [manager=ipaddress]
Parameters
community Specifies a new community string. The maximum
length of a community string is 15 characters. Spaces
are allowed. The name must be enclosed in double
quotes if it includes a space or special character, such
as an exclamation point. Otherwise, the quotes are
optional. The string is case sensitive.
access Specifies the access level of the new community
string. Options are “read” for read only access and
“write” for both read and write access. The default is
“read.”
open Specifies the open or closed status of the community
string. The values are:
yes, on, true The community string is open, meaning
any management workstation can use
the string to access the switch. These
values are equivalent.
no, off, false The community string is closed,
meaning only those management
workstations whose IP addresses are
assigned to the string can use it to
access the switch. You can assign a
management IP address to the string
using the MANAGER option in this
command. The default setting for a
community string is closed. These
values are equivalent.
traphost Specifies the IP address of a trap receiver to receive
system traps.