Allied Telesis management software layer 2+ fast ethernet switches manual Authentication messages

		AT-S62 Command Line User’s Guide
		authentication messages
		between the client and the
		authentication server. Each
		client that attempts to
		access the network is
		uniquely identified by the
		switch by using the client's
		MAC address. This is the
		default setting.
	authorised	Disables 802.1X port-based
	forceauthenticate	authentication and causes
		the port to transition to the
		authorized state without any
		authentication exchange
		required. The port transmits
		and receives normal traffic
		without 802.1X-based
		authentication of the client.
		The parameters are
		equivalent.
	unauthorised	Causes the port to remain in
	forceunauthenticate	the unauthorized state,
		ignoring all attempts by the
		client to authenticate. The
		switch cannot provide
		authentication services to
		the client through the
		interface. The parameters
		are equivalent.
quietperiod	Sets the number of seconds that the switch remains in
	the quiet state following a failed authentication
	exchange with the client. The default value is 60
	seconds. The range is 0 to 65,535 seconds.
reauthenabled	Controls whether the client must periodically
	reauthenticate. Options are:
	enabled	Specifies that the client must
		periodically reauthenticate.

This is the default setting. The time period between reauthentications is set with the reauthperiod parameter.

485