Chapter 6: SNMPv1 and SNMPv2 Community Strings and Trap Commands

DELETE SNMP COMMUNITY

Syntax

delete snmp community=”community” traphost=ipaddress manager=ipaddress

Parameters

 

community

Specifies the SNMP community string on the switch

 

to be modified. The community string must already

 

exist on the switch. This parameter is case sensitive.

 

The name must be enclosed in double quotes if it

 

contains a space or special character, such as an

 

exclamation point. Otherwise, the quotes are

 

optional.

traphost

Specifies the IP address of a trap receiver to be

 

removed from the community string.

manager

Specifies the IP address of a management station to

 

be removed from the community string.

Description

 

This command removes the IP addresses of trap receivers and management workstations from a community string.

The TRAPHOST parameter removes the IP address of a trap receiver from an SNMP community string. Once an IP address is removed, the switch will not send SNMP traps to the trap receiver represented by the address.

The MANAGER parameter removes a management station from the community string. A management station removed from a community string with a closed status can no longer use SNMP and the community string to manage the switch. If you remove the last management station IP address from a community string with a closed status, no SNMP management station can access the switch using that community string.

Examples

The following command deletes the IP address 149.212.11.22 of a management station from the community string “private.”

delete snmp community=private manager=149.212.11.22

86

Page 86
Image 86
Allied Telesis management software layer 2+ fast ethernet switches manual Delete Snmp Community